Sunday, 26 February 2012

Setting up IR remote for AVerTV Digi Volar X in Debian

AVerMedia AVerTV DVB-T Volar X (A815) is an Avermedia usb device able to capture DVB-T signals.

It provides an IR remote device, which we are going to set up in this post.

To properly configure the whole device see previous post



INSTALLING AND SETTING UP LIRC

LIRC stands for 'Linux Infra-red Remote Control'.

It provides the daemons and some utilities to support infra-red remote controls under Linux.
http://lirc.org

$ sudo aptitude install lirc

We investigate about IR devices present in our system:
$ cat /proc/bus/input/devices | grep -n10 a815
187-I: Bus=0003 Vendor=0000 Product=0000 Version=0004
188-N: Name="ACPI Virtual Keyboard Device"
189-P: Phys=
190-S: Sysfs=/devices/virtual/input/input19
191-U: Uniq=
192-H: Handlers=sysrq kbd event19 rfkill
193-B: PROP=0
194-B: EV=3
195-B: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
196-

Installing and setting AVerTV Digi Volar X in Debian

AVerMedia AVerTV DVB-T Volar X (A815) is an Avermedia usb device capable to capture and show DVB-T TV signals.
This device is able to also show HDTV DVB-T signals.

http://linuxtv.org/wiki/index.php/Afatech_AF9015


LINUX KERNEL DRIVER

The device contains an Afatech AF9015 Chip.
Supported in kernel since version 2.6.28.

NOTE: If you have an older kernel version you will have to compile the kernel module:
Compile AF9015 module tutorial.
AF9015 Kernel Module Source.


IMPORTANT: Although AF9015 module is already available in the kernel, it NEEDS ADDITIONAL FIRMWARE INSTALLED to work.


DETECTING THE DEVICE

I plug the usb device:

$ lsusb
... ID 07ca:a815 AVerMedia Technologies, Inc. AVerTV DVB-T Volar X (A815)